HP DL120 G7 1109;비1032; Raid를 보기 위해서 설치했습니다.
설치
rpm -ivh hpacucli-8.60-8.0.noarch.rpm
상태보기
160;hpacucli ctrl slot=1 show
Smart Array P212 in Slot 1
160; 160;Bus Interface: PCI
160; 160;Slot: 1
160; 160;Serial Number: PACCPID121912KY
160; 160;Cache Serial Number: PACCQID122000B5
160; 160;RAID 6 (ADG) Status: Disabled
160; 160;Controller Status: OK
160; 160;Chassis Slot:
160; 160;Hardware Revision: Rev C
160; 160;Firmware Version: 5.14
160; 160;Rebuild Priority: Medium
160; 160;Expand Priority: Medium
160; 160;Surface Scan Delay: 15 secs
160; 160;Surface Scan Mode: Idle
160; 160;Queue Depth: Automatic
160; 160;Monitor and Performance Delay: 60 min
160; 160;Elevator Sort: Enabled
160; 160;Degraded Performance Optimization: Disabled
160; 160;Inconsistency Repair Policy: Disabled
160; 160;Wait for Cache Room: Disabled
160; 160;Surface Analysis Inconsistency Notification: Disabled
160; 160;Post Prompt Timeout: 0 secs
160; 160;Cache Board Present: True
160; 160;Cache Status: OK
160; 160;Accelerator Ratio: 100% Read / 0% Write (0176;터리가 없Ǻ12;서, write cache가 꺼1652;상태)
160; 160;Drive Write Cache: Disabled
160; 160;Total Cache Size: 256 MB
160; 160;No-Battery Write Cache: Disabled
160; 160;Battery/Capacitor Count: 0
160; 160;SATA NCQ Supported: True
- to be continue -
|