Ȟ17;소에lj16; 1228;가 한드림넷 스위치만 1217;속해서 1221;보를 본 1201;1060; 많1060; 1080;습니다.
그런데 운1060; 1339;,172;도 시스코 스위치 CLI 1217;속해볼 기회가 1080;Ǻ12;서 1217;속해서 arp1221;보를 긁Ǻ12;왔lj16;데요
1068;단 한드림넷 스위치에서 mds arp table 명/161;Ǻ12;를 사용해서 1221;보를 1069;Ǻ12;올 ǐ12;lj16;
해NJ17; IP와 mac1452;소 그리고 스위치 연결.108; 포트 넘버까1648; 보여1469;니다.
헌데 시스코 스위치에서 show arp 치면 1064;터6168;1060;스 상에 IP와 MAC1452;소를
보여1452;더라구요.
그래서 1200;lj16; 한드림넷 스위치 명/161;Ǻ12;를 생각해서 각 포트에 1217;속.104;Ǻ12; 1080;lj16;
IP1221;보를 보/140;고 show arp 내에 명/161;Ǻ12;를 여러가1648; 넣Ǻ12;봤습니다만 안나오더라구요.
마1648;ኔ1;에 사수가 가르쳐1456; show mac address-table 명/161;Ǻ12;를 치니까
시스코 스위치 각 포트에 1217;속해 1080;lj16; MAC1452;소 값1008; 나오lj16;데 IPlj16; 안나오Nj12;데
1060;,172; 단순7176; MAC address명/161;Ǻ12;를 사용해서 table값1012; 불러와서 그런 ,163; 같1008;데요.
ip arp table 명/161;Ǻ12;가 따/196;1080;lj16;데 1228;가 1096; 몰라서 1109;비마다 시스코 스위치에 1217;속한 
ip1221;보를 못본 ,163;1064;가Ȣ16;lj16; 1032;문1060; 들Ǻ12;서요.
ᕬ1;시 시스코 스위치에 관/144;해서 1096; 아시lj16; ǥ16; 계시면 1328; 알/140;1452;1;시오~
일반적으로 라우터 역활을 하는 스위치가 아니라면 ip 를 보여줄수 없습니다.
IP address, MAC address, VLAN, Interface, Aging, Type 항목을 arp 명령어로 보여주네요.
NALIN-NETSIM-DSR02#show arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet 192.168.100.3 - 00e1.6d41.2741 ARPA GigabitEthernet1/0/1
Internet 192.168.100.253 0 0015.5d64.fe09 ARPA GigabitEthernet1/0/1
Internet 192.168.100.254 0 c81f.66d3.ff4c ARPA GigabitEthernet1/0/1
Internet 192.168.110.103 - 00e1.6d41.2742 ARPA Vlan2110
Internet 192.168.111.103 - 00e1.6d41.2743 ARPA Vlan2111
Internet 192.168.112.103 - 00e1.6d41.2744 ARPA Vlan2112
NALIN-NETSIM-DSR02#
참고로 버젼은............
NALIN-NETSIM-DSR02#show version
Cisco IOS Software, C2960X Software (C2960X-UNIVERSALK9-M), Version 15.2(7)E0a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Fri 12-Apr-19 04:09 by prod_rel_team
ROM: Bootstrap program is C2960X boot loader
BOOTLDR: C2960X Boot Loader (C2960X-HBOOT-M) Version 15.2(6r)E, RELEASE SOFTWARE (fc1)
NALIN-NETSIM-DSR02 uptime is 13 weeks, 6 days, 23 hours, 17 minutes
System returned to ROM by power-on
System restarted at 11:51:29 KST Tue Mar 10 2020
System image file is "flash:/c2960x-universalk9-mz.152-7.E0a.bin"
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C2960X-24TS-L (APM86XXX) processor (revision B0) with 524288K bytes of memory.
Processor board ID FOC1813S0TM
Last reset from power-on
4 Virtual Ethernet interfaces
1 FastEthernet interface
28 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:E1:6D:41:27:00
Motherboard assembly number : 73-14194-04
Power supply part number : 341-0529-02
Motherboard serial number : FOC181300LX
Power supply serial number : LIT18070K2S
Model revision number : B0
Motherboard revision number : A0
Model number : WS-C2960X-24TS-L
Daughterboard assembly number : 73-14200-03
Daughterboard serial number : FOC18127A7C
System serial number : FOC1813S0TM
Top Assembly Part Number : 800-38008-02
Top Assembly Revision Number : C0
Version ID : V02
CLEI Code Number : CMMMU00ARA
Daughterboard revision number : A0
Hardware Board Revision Number : 0x05
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 30 WS-C2960X-24TS-L 15.2(7)E0a C2960X-UNIVERSALK9-M
Configuration register is 0xF
NALIN-NETSIM-DSR02#
Protocol Address Age (min) Hardware Addr Type Interface
Internet 192.168.1.xx 74 0011.32xx.xxxx ARPA Vlan1
Internet 192.168.1.xx 79 0011.32xx.xxxx ARPA Vlan1
Internet 192.168.1.xx 0 0011.32xx.xxxx ARPA Vlan1
Internet 192.168.1.xx 0 4ccc.6axx.xxxx ARPA Vlan1
Internet 192.168.1.xx - 2c31.24xx.xxxx ARPA Vlan1
BD_L2SW01#show version
Cisco IOS Software, C2960L Software (C2960L-UNIVERSALK9-M), Version 15.2(5c)E, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
예전 100mbps만 지원되는 카탈리스트 2960스위치에서도 동일하게 보이는 명령어인데요..
운영중인 장비에서 보신건가요?