RAID카드에는 젬병이라...ㅜㅜ

아래와 같은 사유로 고수분들의 도움을 구합니다.

1. 사용환경

   - Controller : IBM(Lenovo) M5210 (12g sas)

2. 이전 디스크 연결 사용 상황

   - SSD(SAS) 8개 연결해서 사용

   - 부팅시 Ctrl-R로 제어가능했던 상황

3. 현재 문제 상황

   - 기존 SSD를 전부 걷어내고 SSD 2개와 HDD(SAS) 6개를 꽂음

   - 부팅시 에러가 나면서 Ctrl-R로 들어갈 수 없음 ('C' > 'Y'  누르면 그냥 skip 됨)

   - MEGA Storage Manager나 LSI Manager를 설치해서 디스크를 연결하면 SSD(SAS)는 붙는데, HDD(SAS)는 붙지를 않음 (HDD만으로도 안되고 함께 붙여도 안됨)

     * M5210 허용 Driver를 확인한 결과 허용대상에 해당됨

   - StorCli 명령어(storcli64 /c0 show all) 로 "Boot :" Section에서 보면

예전처럼 돌릴 수 있는 방법이 없나요 .

아래의 내용은 StorCli64 /c0 show all 명령을 통한 컨트롤러의 모든상황을 디스플레이한 내용입니다.

무엇이 문제인지, 어떻게 해야 하는지를 검색해봐도 잘 나오지도 않고 어렵네요.

Generating detailed summary of the adapter, it may take a while to complete.

CLI Version = 007.1410.0000.0000 May 19, 2020

Operating system = Windows 10

Controller = 0

Status = Success

Description = None

Basics :

======

Controller = 0

Model = ServeRAID M5210

Serial Number = SV42101278

Current Controller Date/Time = 08/09/2020, 01:26:59

Current System Date/time = 08/09/2020, 01:27:00

SAS Address = 500605b008e4b940

PCI Address = 00:82:00:00

Mfg Date = 05/19/14

Rework Date = 00/00/00

Revision No = 04A

Version :

=======

Firmware Package Build = 24.21.0-0126

Firmware Version = 4.680.00-8519

CPLD Version = 26514-01A

Bios Version = 6.36.00.3_4.19.08.00_0x06180203

HII Version = 03.25.05.12

NVDATA Version = 3.1705.00-0021

Ctrl-R Version = 5.19-0603

Preboot CLI Version = 01.07-05:#%0000

Boot Block Version = 3.07.00.00-0004

Driver Name = megasas2.sys

Driver Version = 6.714.18.00

Bus :

===

Vendor Id = 0x1000

Device Id = 0x5D

SubVendor Id = 0x1014

SubDevice Id = 0x454

Host Interface = PCI-E

Device Interface = SAS-12G

Bus Number = 130

Device Number = 0

Function Number = 0

Domain ID = 0

Pending Images in Flash :

=======================

Image name = No pending images

Status :

======

Controller Status = Optimal

Memory Correctable Errors = 0

Memory Uncorrectable Errors = 0

ECC Bucket Count = 0

Any Offline VD Cache Preserved = No

BBU Status = 0

PD Firmware Download in progress = No

Support PD Firmware Download = Yes

Lock Key Assigned = No

Failed to get lock key on bootup = No

Lock key has not been backed up = No

Bios was not detected during boot = No

Controller must be rebooted to complete security operation = No

A rollback operation is in progress = No

At least one PFK exists in NVRAM = No

SSC Policy is WB = No

Controller has booted into safe mode = No

Controller shutdown required = No

Controller has booted into certificate provision mode = No

Supported Adapter Operations :

============================

Rebuild Rate = Yes

CC Rate = Yes

BGI Rate  = Yes

Reconstruct Rate = Yes

Patrol Read Rate = Yes

Alarm Control = No

Cluster Support = No

BBU = Yes

Spanning = Yes

Dedicated Hot Spare = Yes

Revertible Hot Spares = Yes

Foreign Config Import = Yes

Self Diagnostic = Yes

Allow Mixed Redundancy on Array = No

Global Hot Spares = Yes

Deny SCSI Passthrough = No

Deny SMP Passthrough = No

Deny STP Passthrough = No

Support more than 8 Phys = Yes

FW and Event Time in GMT = No

Support Enhanced Foreign Import = Yes

Support Enclosure Enumeration = Yes

Support Allowed Operations = Yes

Abort CC on Error = Yes

Support Multipath = Yes

Support Odd & Even Drive count in RAID1E = No

Support Security = Yes

Support Config Page Model = Yes

Support the OCE without adding drives = Yes

Support EKM = Yes

Snapshot Enabled = No

Support PFK = Yes

Support PI = Yes

Support LDPI Type1 = No

Support LDPI Type2 = No

Support LDPI Type3 = No

Support Ld BBM Info = No

Support Shield State = Yes

Block SSD Write Disk Cache Change = Yes

Support Suspend Resume BG ops = Yes

Support Emergency Spares = Yes

Support Set Link Speed = Yes

Support Boot Time PFK Change = Yes

Support JBOD = Yes

Disable Online PFK Change = Yes

Support Perf Tuning = Yes

Support SSD PatrolRead = Yes

Real Time Scheduler = Yes

Support Reset Now = Yes

Support Emulated Drives = Yes

Headless Mode = Yes

Dedicated HotSpares Limited = No

Point In Time Progress = Yes

Extended LD = Yes

Support Uneven span  = No

Support Config Auto Balance = No

Support Maintenance Mode = No

Support Diagnostic results = Yes

Support Ext Enclosure = Yes

Support Sesmonitoring = Yes

Support SecurityonJBOD = Yes

Support ForceFlash = Yes

Support DisableImmediateIO = Yes

Support LargeIOSupport = Yes

Support DrvActivityLEDSetting = Yes

Support FlushWriteVerify = Yes

Support CPLDUpdate = Yes

Support ForceTo512e = Yes

Support discardCacheDuringLDDelete = Yes

Support JBOD Write cache = No

Support Large QD Support = No

Support Ctrl Info Extended = No

Support IButton less = No

Support AES Encryption Algorithm = No

Support Encrypted MFC = No

Support Snapdump = Yes

Support Force Personality Change = No

Support Dual Fw Image = No

Support PSOC Update = No

Support Secure Boot = No

Support Debug Queue = Yes

Support Least Latency Mode = Yes

Support OnDemand Snapdump = Yes

Support Clear Snapdump = Yes

Support FW Triggered Snapdump = Yes

Support PHY current speed = No

Support Lane current speed = No

Support NVMe Width = No

Support Lane DeviceType = No

Support Extended Drive performance Monitoring = No

Support NVMe Repair = No

Support Platform Security = No

Enterprise Key management :

=========================

Capability = Supported

Boot Agent = Not Available

Configured = No

Supported PD Operations :

=======================

Force Online = Yes

Force Offline = Yes

Force Rebuild = Yes

Deny Force Failed = No

Deny Force Good/Bad = No

Deny Missing Replace = No

Deny Clear = No

Deny Locate = No

Support Power State = No

Set Power State For Cfg = No

Support T10 Power State = No

Support Temperature = Yes

NCQ = Yes

Support Max Rate SATA = No

Support Degraded Media = No

Support Parallel FW Update = Yes

Support Drive Crypto Erase = Yes

Support SSD Wear Gauge = No

Supported VD Operations :

=======================

Read Policy = Yes

Write Policy = Yes

IO Policy = Yes

Access Policy = Yes

Disk Cache Policy = Yes

Reconstruction = Yes

Deny Locate = No

Deny CC = No

Allow Ctrl Encryption = No

Enable LDBBM = No

Support FastPath = Yes

Performance Metrics = Yes

Power Savings = No

Support Powersave Max With Cache = No

Support Breakmirror = Yes

Support SSC WriteBack = Yes

Support SSC Association = Yes

Support VD Hide = Yes

Support VD Cachebypass = Yes

Support VD discardCacheDuringLDDelete = Yes

Support VD Scsi Unmap = No

Advanced Software Option :

========================

-------------------------------------------------

Adv S/W Opt                 Time Remaining  Mode 

-------------------------------------------------

MegaRAID FastPath                           -    

MegaRAID CacheCade Pro 2.0                  -    

MegaRAID SafeStore                          -    

MegaRAID RAID5                              -    

-------------------------------------------------

Safe ID =  SQPV75UI79MFMX7ICVLPLW5S4UPD23PV7MWCUTRZ

HwCfg :

=====

ChipRevision =  C0

BatteryFRU = N/A

Front End Port Count = 0

Backend Port Count = 8

BBU = Present

Alarm = Absent

Serial Debugger = Present

NVRAM Size = 32KB

Flash Size = 32MB

On Board Memory Size = 2048MB

CacheVault Flash Size = 8.000 GB

TPM = Absent

Upgrade Key = Absent

On Board Expander = Absent

Temperature Sensor for ROC = Present

Temperature Sensor for Controller = Absent

Upgradable CPLD = Present

Upgradable PSOC = Absent

Current Size of CacheCade (GB) = 0

Current Size of FW Cache (MB) = 1547

ROC temperature(Degree Celsius) = 60

Policies :

========

Policies Table :

==============

------------------------------------------------

Policy                          Current Default 

------------------------------------------------

Predictive Fail Poll Interval   300 sec         

Interrupt Throttle Active Count 16              

Interrupt Throttle Completion   50 us           

Rebuild Rate                    30 %    30%     

PR Rate                         30 %    30%     

BGI Rate                        30 %    30%     

Check Consistency Rate          30 %    30%     

Reconstruction Rate             30 %    30%     

Cache Flush Interval            4s              

------------------------------------------------

Flush Time(Default) = 4s

Drive Coercion Mode = 1GB

Auto Rebuild = On

Battery Warning = On

ECC Bucket Size = 15

ECC Bucket Leak Rate (hrs) = 24

Restore Hot Spare on Insertion = Off

Expose Enclosure Devices = On

Maintain PD Fail History = On

Reorder Host Requests = On

Auto detect BackPlane = SGPIO/i2c SEP

Load Balance Mode = Auto

Security Key Assigned = Off

Disable Online Controller Reset = Off

Use drive activity for locate = Off

Boot :

====

BIOS Enumerate VDs = 1

Stop BIOS on Error = On

Delay during POST = 0

Spin Down Mode = None

Enable Ctrl-R = No

Enable Web BIOS = No

Enable PreBoot CLI = No

Enable BIOS = Yes

Max Drives to Spinup at One Time = 2

Maximum number of direct attached drives to spin up in 1 min = 10

Delay Among Spinup Groups (sec) = 12

Allow Boot with Preserved Cache = Off

High Availability :

=================

Topology Type = None

Cluster Permitted = No

Cluster Active = No

Defaults :

========

Phy Polarity = 0

Phy PolaritySplit = 0

Strip Size = 256 KB

Write Policy = WB

Read Policy = RA

Cache When BBU Bad = Off

Cached IO = Off

VD PowerSave Policy = Controller Defined

Default spin down time (mins) = 30

Coercion Mode = 1 GB

ZCR Config = Unknown

Max Chained Enclosures = 16

Direct PD Mapping = No

Restore Hot Spare on Insertion = No

Expose Enclosure Devices = Yes

Maintain PD Fail History = Yes

Zero Based Enclosure Enumeration = No

Disable Puncturing = Yes

EnableLDBBM = No

DisableHII = No

Un-Certified Hard Disk Drives = Allow

SMART Mode = Mode 6

Enable LED Header = No

LED Show Drive Activity = Yes

Dirty LED Shows Drive Activity = No

EnableCrashDump = Yes

Disable Online Controller Reset = No

Treat Single span R1E as R10 = No

Power Saving option = Disabled

TTY Log In Flash = No

Auto Enhanced Import = Yes

BreakMirror RAID Support = single span R1

Disable Join Mirror = No

Enable Shield State = Yes

Time taken to detect CME = 60 sec

Capabilities :

============

Supported Drives = SAS, SATA

RAID Level Supported = RAID0, RAID1(2 or more drives), RAID5, RAID00, RAID10(2 or more drives per span), RAID50

Enable JBOD = No

Mix in Enclosure = Allowed

Mix of SAS/SATA of HDD type in VD = Not Allowed

Mix of SAS/SATA of SSD type in VD = Not Allowed

Mix of SSD/HDD in VD = Not Allowed

SAS Disable = No

Max Arms Per VD = 32

Max Spans Per VD = 8

Max Arrays = 128

Max VD per array = 64

Max Number of VDs = 64

Max Parallel Commands = 928

Max SGE Count = 60

Max Data Transfer Size = 512 sectors

Max Strips PerIO = 128

Max Configurable CacheCade Size(GB) = 2048

Max Transportable DGs = 0

Enable Snapdump = Yes

Enable SCSI Unmap = Yes

FDE Drive Mix Support = No

Min Strip Size = 64 KB

Max Strip Size = 1.000 MB

Scheduled Tasks :

===============

Consistency Check Reoccurrence = 168 hrs

Next Consistency check launch = 08/15/2020, 03:00:00

Patrol Read Reoccurrence = 168 hrs

Next Patrol Read launch = 08/15/2020, 03:00:00

Battery learn Reoccurrence = 670 hrs

Next Battery Learn = 08/15/2020, 06:00:00

OEMID = Lenovo

Security Protocol properties :

============================

Security Protocol = None

Enclosures = 1

Enclosure LIST :

==============

--------------------------------------------------------------------

EID State Slots PD PS Fans TSs Alms SIM Port# ProdID VendorSpecific 

--------------------------------------------------------------------

252 OK        8  0  0    0   0    0   1 -     SGPIO                 

--------------------------------------------------------------------

EID=Enclosure Device ID |PD=Physical drive count |PS=Power Supply count|

TSs=Temperature sensor count |Alms=Alarm count |SIM=SIM Count ||ProdID=Product ID

Cachevault_Info :

===============

------------------------------------

Model  State   Temp Mode MfgDate    

------------------------------------

CVPM02 Optimal 30C  -    2015/02/09 

------------------------------------