CPUz 1.5

   Á¶È¸ 19991   Ãßõ 0    

cpuz_150.zip (595.2K), Down : 423, 2009-02

CPU-Z Readme file
------------------
Version 1.50
February 2009
Contact : ****@*****.com
Web page: http://www.cpuid.com/cpuz.php
Validation page : http://valid.canardpc.com
Hall of Fame : http://valid.canardpc.com/records.php
Forum : http://forum.canardpc.com/forumdisplay.php?f=74
CPUID SDK : http://www.cpuid-pro.com/devkits.php
CPU-Z is a freeware and can be freely distributed.

Configuration file (cpuz.ini)
------------------------------
The configuration file must be named cpuz.ini and be present at the same directory level
as cpuz.exe. It contains the following :
[CPU-Z]
TextFontName=Verdana
TextFontSize=13
TextFontColor=000060
LabelFontName=Verdana
LabelFontSize=13
PCI=1
MaxPCIBus=256
DMI=1
Sensor=1
SMBus=1
Display=1
ShowDutyCycles=0
- TextFontName : Font used for the information boxes.
- TextFontSize : Size of the font used for the information boxes.
- TextFontColor : Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB
- LabelFontName : Font used for the label boxes.
- LabelFontSize : Size of the font used for the label boxes.
- Sensor : Set to OFF (or 0) disables sensor chip detection and voltages measurement. 1 to enable.
- PCI : Set to OFF (or 0) disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information. 1 to enable.
- MaxPCIBus : Sets the maximum PCI bus to scan. Default value is 256.
- DMI : Set to OFF (or 0) disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision. 1 to enable.
- SMBus : Set to OFF (or 0) disables SMBus information : SPD, and, depending on the hardware, sensoring information. 1 to enable.
- Display : Set to OFF (or 0) disables the video card information reported in the validator. 1 to enable.
- ShowDutyCycles : Set to 1, switches the alternate clock computation method based on duty cycles. 0 to disable.
Parameters
----------
-txt=filename : Launch CPU-Z in ghost mode (no interface appears) and generates the register dump file (.txt)
in the same directory as the exe file.
-html=filename : Same as "-txt" except it generates the html report.
-core=id : Displays clock speed of core #id (id can be set from 0 to Number of cores minus one).

Keys
----
F5 : save the current tab in a bmp file
F6 : save the current tab in the clipboard
F7 : save cvf file in the current directory

Cache Latency Tool
------------------
The cache latency tool can be downloaded at that address : http://www.cpuid.com/download/latency.zip

History
-------
--------------------------------------------------------------------------------------------------
1.50 - February 2009
- Improved support for AMD Phenom II processor.
- Support for NVIDIA 740i chipset.
- Several bug fixes.
MD5 cpuz.exe (1.50) : E1C827C54F527404EDDA6D65DA0280D8
ªÀº±Û Àϼö·Ï ½ÅÁßÇÏ°Ô.


PDS
Á¦¸ñPage 77/77
2014-05   5021149   Á¤ÀºÁØ1
2015-12   1556488   ¹é¸Þ°¡
2017-03   21209   ½Öcpu
2020-08   11045   ½ºÄµl¹ÎÇö±â
2021-01   5426   ¼úÀÌ
2021-03   8143   ±èÀå¿ì
2021-06   5042   FOXBI
2016-11   13665   ÇãÀα¸¸¶Æ¾
2020-05   12452   makesound
2016-04   21553   ´©±¼±î
2016-06   19110   ¸¼Àº¿©¸§
2021-03   10416   ½ºÄµl¹ÎÇö±â
2016-02   14809   µðºñµð
2016-09   25070   ¼­¿ïl°­ÇѸð
2017-03   19219   stone92±è°æ¹Î
2017-07   27046   Â÷³ÝÄÄÇ»ÅÍ
2017-07   10068   ÀÚ¿¬ÀÎ
2022-09   11370   sbg2005
2016-06   19860   ÇÑ¿©¸§¹ãÀDzÞ
2020-05   38128   ½ºÄµl¹ÎÇö±â