*********  Change Log For V1.43 Firmware

2006-10-17
        1 Create ARC1231 ID:17D3-1280 SUBID:17D3-1231
          Create ARC1261 ID:17D3-1280 SUBID:17D3-1261
        2 Fix ARC1280 boot code for single core IOP341
2006-10-18
        1 TLER modified back to default
2006-10-19
        1 Fix IOP331/332/333 based PCI adapter installed on MAC-PRO problem.
        2 Fix ARC1110/1210:support R6.
2006-10-26
        1 Fix when raid is degraded and hdd missing offline and reboot.
2006-11-2
        1 Change "For Windows" back to "4K Block" for over 2TB support
2006-11-7
        1 Correct display of raid capacity over 10 Tera bytes
        2 Fix VT100/LCD display error for raid larger than 10Tera bytes
2006-11-14
        1 Fix bug for 64bit FRAM LOG address error
2006-11-17
        1 Fix filter of smart hdd temp, if smart polling is disabled
          then enabled, the temperature will star from -122 and up slowly.
2006-12-6
        1 IOP34X:fix boot code ECC checking code
        2 IOP34X:change RANK size check method
2006-12-8
        1 Fix ARC1210/1220/1230/1260 refresh interval incorrect, different from
          IOP331 based ARC11X0 controller
2006-12-11
        1 Fix ARC1XXX:SDRAM programming error
2007-1-19
        1 Fix ARC1120/1130/1160/1220/1230/1260 with ARC R6 engine XOR/RSC check flag
2007-1-23
        1 Add battery status report in gui
        2 Add HDD smart status report in gui including media error count and
          timeout count
2007-1-25
        1 Fix ARC11x0/12x0 SCSI compliance test
          (A) Return INQUIRY and mode sense length
          (B) Fix 10 bytes mode sense length
2007-1-29
        1 Fix volume size limit to be 512T
        2 Fix ARC1231/1261/1280 with LCD may hangup, unmatched I2C port lock/unlock
2007-2-7
        1 Fix ARC1XXX, spin down/up, add SPIN_UP_IN_THREAD
        2 Fix hang when delete failed migration volume
2007-4-10
        1 Fix IOP332/333 based controller work with INTEL S3000AH with PCIE link
          down issue.
2007-4-11
        1 Add patch for 60x1
2007-4-12
        1 Fix ARC1280/1231/1261/1221 with dual core IOP342 or IOP348 problem
2007-4-13
        1 Fix ARC1xxx update firmware from HTTP and got "Invalid Firmware Signature"
          casued by network divide packet into one more fragment, firmware should
          check this condition to avoid this problem.
        2 Add LED_POLARITY_SETTABLE for ARC1xxx
2007-4-16
        1 Add WD 10000RPM drive detection failed
        2 Build 1.43 for ARC1xxx (PCI-X/PCI-E)

=======================================================================================

제가 받은 1220은 펌이 1.41입니다.   1.43에서 펌업 관련 문제가 해결 되었네요...

지금 도스 모드에서도 펌업이 안먹히는 상황이... 그나마 주말이라 가지고 놀아 보겠네요.

왜 도스에서도 카드가 펌웨어를 뱉을까요..??  지금 난관 봉착입니다.