일전에 문의 드렸던 FULCRUM MICROSYSTEMS FM2224EP 모델입니다.

콘솔케이블로 일단 접속은 했지만

아무래도 문제가 있는거 같습니다.

Mounting local filesystems:  mount: mount point /boot does not exist
[FAILED]

/boot mount 부분 실패

Making focalpoint devices...

이 부분에서 더이상 진행이 안되는군요

펌웨어가 깨진듯 한데 ~  우째 복구할 방법이 없을까요?

조언 부탁드리겠습니다~

------------------------- log ----------------------

U-Boot 1.1.6 (Jan 10 2007 - 13:44:02) *** FULCRUM MICROSYSTEMS - FM2224EP ***

CPU:   8541, Version: 1.1, (0x807a0011)
Core:  E500, Version: 2.0, (0x80200020)
Clock Configuration:
       CPU: 528 MHz, CCB: 264 MHz,
       DDR: 132 MHz, LBC:  33 MHz
L1:    D-cache 32 kB enabled
       I-cache 32 kB enabled

***************************************************************************
*****************   FULCRUM MICROSYSTEMS FM2224EP *************************
************************* UBOOT VERSION 1.8 *******************************
***************************************************************************

I2C:   ready
DRAM:  Initializing
    DDR: 512 MB
Press any key for RAM test, otherwise, just wait 2s!
FLASH:  8 MB
L2 cache 256KB: enabled
env_relocate[208] offset = 0x20000000
env_relocate[227] malloced ENV at 1febf008
env_relocate[271] end of function
PCI-X will only work at 66 MHz
In:    serial
Out:   serial
Err:   serial
Net:   TSEC0
IDE:   Bus 0: OK
  Device 0: Model:  Firm: 20070709 Ser#: CF CARD     00002AEF
            Type: Hard Disk
            Capacity: 967.6 MB = 0.9 GB (1981728 x 512)
Setting VDD:  mv=1200  r=8550 d=43   set to 1.2
Setting VDDX:  mv=1200  r=8560 d=43   set to 1.2
Setting VTT1:  mv=1500  dev=2d addr=0 r2=963 rpot=1594 d=8   set to 1.5
Setting VTT2:  mv=1500  dev=2d addr=80 r2=963 rpot=1594 d=8   set to 1.5
Setting VTT3:  mv=1500  dev=2e addr=0 r2=963 rpot=1594 d=8   set to 1.5
Setting VTT4:  mv=1500  dev=2e addr=80 r2=963 rpot=1594 d=8   set to 1.5
Hit any key to stop autoboot:  0

1337004 bytes read

13450823 bytes read
## Booting image at 04000000 ...
   Image Name:   Linux-2.6.22
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1336940 Bytes =  1.3 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 04200000 ...
   Image Name:   initramfs
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    13450759 Bytes = 12.8 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Ramdisk to 1f1ea000, end 1febde07 ... OK
Memory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb
Linux version 2.6.22 (nsundar@montezuma) (gcc version 4.0.0 (DENX ELDK 4.1 4.0.0)) #24 Thu Oct 9 11:31:43 PDT 2008
fm85xx_setup_arch
Zone PFN ranges:
  DMA             0 ->   131072
  Normal     131072 ->   131072
early_node_map[1] active PFN ranges
    0:        0 ->   131072
Built 1 zonelists.  Total pages: 130048
Kernel command line: root=/dev/hda2 rw ip=10.0.55.150:10.0.80.21::255.255.0.0:reno:eth0 console=ttyS0,9600
OpenPIC Version 1.2 (1 CPUs and 60 IRQ sources) at fcfbb000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 503680k available (2192k kernel code, 556k data, 136k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: bridge rsrc fcffd000..fdffcfff (100), parent c02723b4
PCI: bridge rsrc 80000000..9fffffff (200), parent c0272398
Generic PHY: Registered new driver
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 13135k freed
JFFS2 version 2.2. (NAND) â© 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: #1 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 26) is a 16550A
serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 26) is a 16550A
RAMDISK driver initialized: 8 RAM disks of 32768K size 1024 blocksize
loop: module loaded
Gianfar MII Bus: probed
eth0: Gianfar Ethernet Controller Version 1.2, 00:15:ed:40:12:41
eth0: Running with NAPI enabled
eth0: 256/256 RX/TX BD ring size
eth1: Gianfar Ethernet Controller Version 1.2, 07:de:29:00:07:de
eth1: Running with NAPI enabled
eth1: 256/256 RX/TX BD ring size
Marvell 88E1101: Registered new driver
Marvell 88E1111: Registered new driver
Marvell 88E1145: Registered new driver
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
IDE phys mem : f0000000...f001ffff (size 0001ffff)
IDE virt base: 0xe1080000
CSR virt base: 0xe1100000
vector: 0x80c40032
port: 0xe1080002 => 0x00
port: 0xe1080007 => 0x00
port: 0xe108000b => 0x00
port: 0xe108000f => 0xBC
port: 0xe1080013 => 0x8D
port: 0xe1080017 => 0x00
port: 0xe108001b => 0xE0
port: 0xe108001f => 0x50
port: 0xe109001b => 0x50
port: 0xe1080000 => 0xF0
hda: , ATA DISK drive
ide0 at 0xe1080002-0xe1080009,0xe109001b on irq 50
hda: max request size: 128KiB
hda: 1981728 sectors (1014 MB) w/1KiB Cache, CHS=1966/16/63
 hda: hda1 hda2 hda3 hda4
No NAND device found!!!
i2c /dev entries driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
IP-Config: Complete:
      device=eth0, addr=10.0.55.150, mask=255.255.0.0, gw=255.255.255.255,
     host=reno, domain=, nis-domain=(none),
     bootserver=10.0.80.21, rootserver=10.0.80.21, rootpath=
Freeing unused kernel memory: 136k init
INIT: version 2.85 booting
                Welcome to DENX Embedded Linux Environment
                Press 'I' to enter interactive startup.
Building the cache [  OK  ]
 storage network audio done[  OK  ]
Timed out waiting for time change.
Setting clock : Thu Jan  1 00:00:21 UTC 1970 [  OK  ]
Setting hostname reno:  [  OK  ]
Checking filesystems
Checking all file systems.
[  OK  ]
Mounting local filesystems:  mount: mount point /boot does not exist
[FAILED]
Enabling swap space:  [  OK  ]
Before mount!
After mount!
After modprobe!
INIT: Entering runlevel: 3
Before kill getkey!
After kill getkey!
Entering non-interactive startup
Bringing up loopback interface:  [  OK  ]
Starting system logger: [  OK  ]
Starting kernel logger: [  OK  ]
Mounting other filesystems:  mount: mount point /boot does not exist
[FAILED]
Starting sshd: [  OK  ]
Starting xinetd: [  OK  ]
Making focalpoint devices...

0 4 8 0  t
 0 P\<t°0œpè ø˜øøì¼pð°Xðüœðhp|¼œøø°0`t0848ppX`
 8°ôü8ø