아직은 문제없이 사용하고 있는 하드들 입니다 현제 소프트웨어구성하여 하드 4개로 raid 5 구성 했습니다
간만에 접속해서 하드디스크 정보를 보니 에러들이 많이 있는거 같은대 예방차원에서 갈아줘야 할까요?
nas4free 사용하고 있는대 한개씩 빼서 새걸로 넣으면 알아서 셋팅이 될지도 의문이고 자료는 많지 않고 매일 백업은 하고 있지만 그래도 겁나네요
아래 정보 좀 봐주시고 조언좀 부탁드리겠습니다
| 장치 /dev/ada1 - Seagate Barracuda 7200.10 | |
=== START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3250410AS Serial Number: 9RY3KX0N Firmware Version: 4.AAA User Capacity: 250,058,268,160 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Tue Dec 5 13:47:29 2017 KST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82)Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0)The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003)Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01)Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 64) minutes. SCT capabilities: (0x0001)SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 090 090 020 Old_age Always - 10896 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 6 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 550954899 9 Power_On_Hours 0x0032 061 061 000 Old_age Always - 34696 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2604 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 2596 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 059 044 045 Old_age Always In_the_past 41 (Min/Max 1/56 #7) 194 Temperature_Celsius 0x0022 041 056 000 Old_age Always - 41 (0 1 0 0 0) 195 Hardware_ECC_Recovered 0x001a 065 053 000 Old_age Always - 187104406 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 2807 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2807 occurred at disk power-on lifetime: 12971 hours (540 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 2e 51 1c ed Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 2e 51 1c ed 00 00:06:10.263 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 51 1c e0 00 00:06:10.139 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 2e 51 1c ed 00 00:06:10.139 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 2e 51 1c e0 00 00:06:09.978 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 01 2e 51 1c ed 00 00:06:09.977 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 2806 occurred at disk power-on lifetime: 12971 hours (540 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 2e 51 1c ed Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 2e 51 1c ed 00 00:06:10.263 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 51 1c e0 00 00:06:10.139 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 2e 51 1c ed 00 00:06:10.139 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 6f 59 1c e0 00 00:06:09.978 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 01 6f 59 1c e0 00 00:06:09.977 READ MULTIPLE EXT Error 2805 occurred at disk power-on lifetime: 12969 hours (540 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 2e 51 1c ed Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 2e 51 1c ed 00 00:14:23.998 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 51 1c e0 00 00:14:23.952 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 2e 51 1c ed 00 00:14:27.983 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 2e 51 1c e0 00 00:14:27.983 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 01 2e 51 1c ed 00 00:14:27.859 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 2804 occurred at disk power-on lifetime: 12969 hours (540 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 2e 51 1c ed Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 2e 51 1c ed 00 00:14:23.998 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 51 1c e0 00 00:14:23.952 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 2e 51 1c ed 00 00:14:23.952 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 6f 59 1c e0 00 00:14:23.506 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 01 6f 59 1c e0 00 00:14:23.505 READ MULTIPLE EXT Error 2803 occurred at disk power-on lifetime: 12969 hours (540 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 2e 51 1c ed Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 2e 51 1c ed 00 00:06:09.462 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 51 1c e0 00 00:06:09.338 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 2e 51 1c ed 00 00:06:09.338 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 2e 51 1c e0 00 00:06:09.180 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 01 2e 51 1c ed 00 00:06:09.179 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 12962 - # 2 Short offline Completed without error 00% 12962 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| 장치 /dev/ada2 - Seagate Barracuda 7200.10 | |
=== START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3250410AS Serial Number: 9RY3JDS4 Firmware Version: 4.AAA User Capacity: 250,058,268,160 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Tue Dec 5 13:47:29 2017 KST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82)Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0)The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003)Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01)Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 64) minutes. SCT capabilities: (0x0001)SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 090 090 020 Old_age Always - 10494 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 2 7 Seek_Error_Rate 0x000f 086 060 030 Pre-fail Always - 409908323 9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 20483 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2423 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 060 045 045 Old_age Always In_the_past 40 (Min/Max 7/55) 194 Temperature_Celsius 0x0022 040 055 000 Old_age Always - 40 (0 7 0 0 0) 195 Hardware_ECC_Recovered 0x001a 068 058 000 Old_age Always - 185805603 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 574 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 574 occurred at disk power-on lifetime: 11477 hours (478 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 2e 51 1c ed Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 2e 51 1c ed 00 00:04:05.757 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 51 1c e0 00 00:04:05.632 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 2e 51 1c ed 00 00:04:05.632 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 2e 51 1c e0 00 00:04:05.507 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 01 2e 51 1c ed 00 00:04:05.494 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 573 occurred at disk power-on lifetime: 11477 hours (478 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 2e 51 1c ed Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 2e 51 1c ed 00 00:04:05.757 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 51 1c e0 00 00:04:05.632 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 2e 51 1c ed 00 00:04:05.632 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 55 1c e0 00 00:04:05.507 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 39 00 10 1f 55 1c e0 00 00:04:05.494 WRITE MULTIPLE EXT Error 572 occurred at disk power-on lifetime: 9797 hours (408 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 2e 51 1c ed Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 2e 51 1c ed 00 01:29:05.631 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 51 1c e0 00 01:29:09.385 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 2e 51 1c ed 00 01:29:09.385 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 2e 51 1c e0 00 01:29:09.261 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 01 2e 51 1c ed 00 01:29:09.261 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 571 occurred at disk power-on lifetime: 9797 hours (408 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 2e 51 1c ed Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 2e 51 1c ed 00 01:29:05.631 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 51 1c e0 00 01:29:05.630 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 2e 51 1c ed 00 01:29:05.626 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 6f 59 1c e0 00 01:29:05.626 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 01 6f 59 1c e0 00 01:29:05.626 READ MULTIPLE EXT Error 570 occurred at disk power-on lifetime: 9792 hours (408 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 2e 51 1c ed Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 2e 51 1c ed 00 01:27:45.345 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 51 1c e0 00 01:27:45.345 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 2e 51 1c ed 00 01:27:45.221 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 2e 51 1c e0 00 01:27:45.221 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 01 2e 51 1c ed 00 01:27:43.114 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] SMART Self-test log structure revision number 1 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| 장치 /dev/ada3 - Seagate Barracuda 7200.10 | |
=== START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3250410AS Serial Number: 9RY3KXA5 Firmware Version: 4.AAA User Capacity: 250,058,268,160 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Tue Dec 5 13:47:29 2017 KST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82)Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0)The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003)Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01)Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 64) minutes. SCT capabilities: (0x0001)SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 090 090 020 Old_age Always - 10737 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 3 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 329988487 9 Power_On_Hours 0x0032 059 059 000 Old_age Always - 36250 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2117 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 098 098 000 Old_age Always - 2 190 Airflow_Temperature_Cel 0x0022 058 042 045 Old_age Always In_the_past 42 (Min/Max -1/58 #24) 194 Temperature_Celsius 0x0022 042 058 000 Old_age Always - 42 (0 255 0 0 0) 195 Hardware_ECC_Recovered 0x001a 064 048 000 Old_age Always - 181698632 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 38 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 38 occurred at disk power-on lifetime: 14694 hours (612 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 2e 51 1c ed Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 2e 51 1c ed 00 00:03:34.493 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 51 1c e0 00 00:03:34.330 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 2e 51 1c ed 00 00:03:34.329 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 2e 51 1c e0 00 00:03:34.329 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 01 2e 51 1c ed 00 00:03:33.191 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 37 occurred at disk power-on lifetime: 14694 hours (612 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 2e 51 1c ed Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 2e 51 1c ed 00 00:03:34.493 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 51 1c e0 00 00:03:34.330 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 2e 51 1c ed 00 00:03:34.329 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 6f 59 1c e0 00 00:03:34.329 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 01 6f 59 1c e0 00 00:03:33.191 READ MULTIPLE EXT Error 36 occurred at disk power-on lifetime: 14694 hours (612 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 2e 51 1c ed Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 2e 51 1c ed 00 00:03:15.827 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 51 1c e0 00 00:03:15.814 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 2e 51 1c ed 00 00:03:18.547 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 2e 51 1c e0 00 00:03:18.547 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 01 2e 51 1c ed 00 00:03:18.423 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 35 occurred at disk power-on lifetime: 14694 hours (612 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 2e 51 1c ed Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 2e 51 1c ed 00 00:03:15.827 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 51 1c e0 00 00:03:15.814 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 2e 51 1c ed 00 00:03:15.801 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 55 1c e0 00 00:03:15.787 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 39 00 10 1f 55 1c e0 00 00:03:15.774 WRITE MULTIPLE EXT Error 34 occurred at disk power-on lifetime: 11908 hours (496 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 2e 51 1c ed Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 2e 51 1c ed 00 00:37:31.429 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 2e 51 1c e0 00 00:37:31.261 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 2e 51 1c ed 00 00:37:31.260 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 2e 51 1c e0 00 00:37:31.260 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 01 2e 51 1c ed 00 00:37:29.969 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 14675 - # 2 Short offline Completed without error 00% 14495 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| 장치 /dev/ada4 - SAMSUNG SpinPoint S250 | |
=== START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint S250 Device Model: SAMSUNG HD250HJ Serial Number: S0USJDWPC17447 LU WWN Device Id: 5 0000f0 0dbc17447 Firmware Version: FH100-06 User Capacity: 250,058,268,160 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b Local Time is: Tue Dec 5 13:47:30 2017 KST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02)Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 40)The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 3697) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003)Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01)Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 62) minutes. SCT capabilities: (0x003f)SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 17 3 Spin_Up_Time 0x0007 253 253 025 Pre-fail Always - 4416 4 Start_Stop_Count 0x0032 087 087 000 Old_age Always - 13189 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 21177 10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2872 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 19055360 184 End-to-End_Error 0x0033 253 253 099 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 5373953 188 Command_Timeout 0x0032 253 253 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 148 079 000 Old_age Always - 30 (Min/Max 4/53) 194 Temperature_Celsius 0x0022 145 082 000 Old_age Always - 31 (Min/Max 4/52) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 19055360 196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 202 Data_Address_Mark_Errs 0x0032 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 80% 5835 - # 2 Short offline Completed without error 00% 5672 - # 3 Abort offline test Aborted by host 80% 5667 - # 4 Short offline Completed without error 00% 5520 - # 5 Short offline Completed without error 00% 5510 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. | |
sda1, sda2, sda3 교환, sda4는 OK
먼저 ada4 부터
------------
장치 /dev/ada4 - SAMSUNG SpinPoint S250
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 21177
No Errors Logged
------------
배드섹터가 생겨서 리매핑된 일이 없습니다. 에러가 난 적도 없습니다.
OK
다음 ada1
------------
장치 /dev/ada1 - Seagate Barracuda 7200.10
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 6
9 Power_On_Hours 0x0032 061 061 000 Old_age Always - 34696
Error 2807 occurred at disk power-on lifetime: 12971 hours (540 days + 11 hours)
Error 2806 occurred at disk power-on lifetime: 12971 hours (540 days + 11 hours)
Error 2805 occurred at disk power-on lifetime: 12969 hours (540 days + 9 hours)
Error 2804 occurred at disk power-on lifetime: 12969 hours (540 days + 9 hours)
Error 2803 occurred at disk power-on lifetime: 12969 hours (540 days + 9 hours)
------------
물리적 배드섹터가 발견되어 리매핑된 블럭이 6개.
Power_On_Hours 34,696 중에서 최근의 에러가 12,971 때 생긴 것입니다. 오래 전에 생긴 에러죠. 최근에는 에러가 전혀 없었습니다.
OK
다음 ada2
------------
장치 /dev/ada2 - Seagate Barracuda 7200.10
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 2
9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 20483
Error 574 occurred at disk power-on lifetime: 11477 hours (478 days + 5 hours)
Error 573 occurred at disk power-on lifetime: 11477 hours (478 days + 5 hours)
Error 572 occurred at disk power-on lifetime: 9797 hours (408 days + 5 hours)
Error 571 occurred at disk power-on lifetime: 9797 hours (408 days + 5 hours)
Error 570 occurred at disk power-on lifetime: 9792 hours (408 days + 0 hours)
------------
물리적 배드섹터가 발견되어 리매핑된 블럭이 2개.
Power_On_Hours 20,483 중에서 최근의 에러가 11,477 때 생긴 것입니다. 오래 전에 생긴 에러죠. 최근에는 에러가 전혀 없었습니다.
OK
------------
장치 /dev/ada3 - Seagate Barracuda 7200.10
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 3
9 Power_On_Hours 0x0032 059 059 000 Old_age Always - 36250
Error 38 occurred at disk power-on lifetime: 14694 hours (612 days + 6 hours)
Error 37 occurred at disk power-on lifetime: 14694 hours (612 days + 6 hours)
Error 36 occurred at disk power-on lifetime: 14694 hours (612 days + 6 hours)
Error 35 occurred at disk power-on lifetime: 14694 hours (612 days + 6 hours)
Error 34 occurred at disk power-on lifetime: 11908 hours (496 days + 4 hours)
------------
물리적 배드섹터가 발견되어 리매핑된 블럭이 3개.
Power_On_Hours 36,250 중에서 최근의 에러가 14,694 때 생긴 것입니다. 오래 전에 생긴 에러죠. 최근에는 에러가 전혀 없었습니다.
OK
ada4를 제외한 3개의 disk는 error난 전과가 있습니다만 오래 전 소싯적에 생긴 일이었습니다. 그 후로 오랜동안 아무 문제 없이 살아 왔으니 크게 신경 쓸 필요는 없다고 봅니다. 물리적 배드섹터가 발견되어 리매핑된 블럭이 몇개 있는 것도 상관 없습니다. 일종의 하드디스크 기능입니다.
* 어떤 연유로 생겼거나 오래된 error는 크게 신경 쓰지 않아도 괜찮습니다. 최근에 error가 났다면 원인이 무엇인지 그 이후로 지속적으로 error가 증가하는지 관찰해야 합니다.
이렇게나 상세하게 봐주시니 정말정말 고맙습니다
참고하여 구준히 체크 해보겠습니다
감사합니다