|
(광고) 단통법 시대의 인터넷가입 가이드(ver2.0) (234) |
백메가 |
2015-12 |
1682241 |
25 |
2015-12
1682241
1 백메가
|
|
[필독] 처음 오시는 분을 위한 안내 (734) |
정은준1 |
2014-05 |
5147660 |
0 |
2014-05
5147660
1 정은준1
|
40229 |
집에 나무문제... (5) |
김건우 |
2018-10 |
4389 |
0 |
2018-10
4389
1 김건우
|
40228 |
Suspend to RAM 하기전에 모든 하드들을 언마운트 시켜야 될까요? (2) |
izegtob |
2015-10 |
4389 |
0 |
2015-10
4389
1 izegtob
|
40227 |
DELL VS IBM !!X86서버 많이 다뤄 보신분 계신가요? (6) |
허니영호 |
2015-01 |
4389 |
0 |
2015-01
4389
1 허니영호
|
40226 |
윈도우10 하드리셋후 efi 쉘로 부팅...정상인가요? (2) |
개백수28호 |
2018-01 |
4389 |
0 |
2018-01
4389
1 개백수28호
|
40225 |
[ VMware ] guestfish에 대응하는 VMDK 편집가능한 Tool 문의 드립니다. |
전설속의미… |
2016-10 |
4389 |
0 |
2016-10
4389
1 전설속의미…
|
40224 |
Z820 에 Intel SSD 750 을 부팅용으로 사용이 가능한지요 ? (3) |
김익태 |
2016-04 |
4389 |
1 |
2016-04
4389
1 김익태
|
40223 |
HP DL360 G6 이서버에 호환 되는 서버 메모리를 알고 싶습니다. (2) |
런런런 |
2015-04 |
4389 |
0 |
2015-04
4389
1 런런런
|
40222 |
후지즈 primergy rx100 s7--- ssd 인식문의 (3) |
chotws |
2018-02 |
4389 |
0 |
2018-02
4389
1 chotws
|
40221 |
노트북그래픽카드가 인텔HD3000으로 잡히는데 도무지 설정방법을 모르겠습니다. 외장… (4) |
정상백 |
2015-07 |
4389 |
0 |
2015-07
4389
1 정상백
|
40220 |
스위치 허브 질문입니다 ㅠㅠ (9) |
메론 |
2017-05 |
4389 |
0 |
2017-05
4389
1 메론
|
40219 |
ML110 G7에 ESXi를 설치하려고 합니다. (2) |
회로쟁이 |
2014-04 |
4389 |
0 |
2014-04
4389
1 회로쟁이
|
40218 |
[완료] hp dl360p G7 레이드 (P410i) 구성 질문입니다. (6) |
이니이니 |
2017-10 |
4388 |
0 |
2017-10
4388
1 이니이니
|
40217 |
혹시 윈도우에서 NAS 삼바(SMB)연결 문제 해결될려나요? (8) |
류넨아이스 |
2019-02 |
4388 |
0 |
2019-02
4388
1 류넨아이스
|
40216 |
가정에서 가상화를 통해 사용하는 서버에서 DB와 웹서버 등을 분리하는게 의미가 있… (6) |
아름드리소… |
2017-07 |
4388 |
1 |
2017-07
4388
1 아름드리소…
|
40215 |
4T HDD 검색하다 보니 marshall 이라는 업체가 있는데... (5) |
NeOpLE |
2016-12 |
4388 |
0 |
2016-12
4388
1 NeOpLE
|
40214 |
PC 청소용 컴프레셔 1HP, 2.5HP 뭘 살까요? (19) |
박수형 |
2020-03 |
4388 |
0 |
2020-03
4388
1 박수형
|
40213 |
이게 무슨 써버용 쿨러인지? (8) |
나파이강승훈 |
2016-12 |
4388 |
0 |
2016-12
4388
1 나파이강승훈
|
40212 |
아버지 PC 선택 조언 부탁드립니다 (17) |
분노의다운힐 |
2017-11 |
4388 |
0 |
2017-11
4388
1 분노의다운힐
|
40211 |
미크로팅 네트웍에서 상부 네트웍의 프린터 사용하기 (8) |
회원K |
2016-07 |
4388 |
0 |
2016-07
4388
1 회원K
|
40210 |
MS의 라이센스 정책 빡빡할까요? (2) |
악땅 |
2014-07 |
4388 |
0 |
2014-07
4388
1 악땅
|
V1 CPU를 구해야 하고 거기서 정상 동작하면 도스 USB 디스크를 준비해서 바이오스 업해야 합니다..
감사합니다
그런데 바이오스를 업데이트를 시도하다 뭐가 잘못된것이 아니라면, 우선 위 박문형 선생님 덧글처럼
보드의 바이오스가 v2 CPU를 지원하는 버젼이 아닐수도 있을것 같습니다
v1 CPU를 구해서 정상적으로 POST 되는지 확인해보시는게 어떨까요
바이오스 업데이트가 가능해집니다..
만 라이센스 키가 사실 IPMI 인터페이스의 MAC 주소를 HMAC SHA1 해싱을 한것입니다
https://twitter.com/kleissner/status/996955400787423232?lang=ko
이대로 따라하시면 됩니다.
알려주신 방법도 공부해 보겠습니다.
감사합니다.
슈마보드가 좀 까탈스럽더라구요. 개인적인 생각으론 아직 씨모스 리라이팅 해야할 정도는 아니라고 보여지는데
보드에 보면 JBR1 점퍼(COM2포트 옆에 있음)가 바이오스 리커버리 점퍼 같은데요. 전원 종료후 핀12번에 꽂혀있으면 23번에 꽂으시고, 그전에 최신 바이오스를 압축을 푼후에 usb 루트에 복사하시고, usb를 꽂고 전원을 넣으면 복구 화면이 나올수도 있고 안나올 수도 있는데 잠시 기다리면 정상 복구가 되었으면 전원이 꺼질겁니다. 그러면 JBR1 점퍼를 정상위치 시키고 usb 빼고 부팅해보세요. (cpu, ram 하나씩만 끼우고 하세요.)
http://www.wiredzone.com/mmenglish/Others/10021833-Manual.pdf
1-3쪽 JBR1 점퍼 위치 참고
슈마 매뉴얼에는 바이오스 리커버리 설명은 없군요.
고맙습니다.
단지 JBR1점퍼대신 JPME1/2를 2-3번으로 하고 바이오스 입힌후 다시 1-2로 복귀시켰더니 잘 작동하였습니다.
You must update the IPMI firmware to version 2.0 or above first, Before upgrading this BIOS.
To disable ME (Intel Management Engine), before BIOS update starts, power down the system, and set the JPME1 and/or JPME2 (if applicable) jumpers on the motherboard to pin 2-3 location. ***Fail to do so may result in unnecessary RMA process.*** After the BIOS update, please power down the system, and return the jumpers to their default locations (pin 1-2).
BIOS Recovery (see user's manual for details)
================================================
Recovery BIOS with a USB Drive
If the BIOS file is corrupted and the system is not able to boot up, this feature will allow you to recover the BIOS image using a USB-attached device. A USB flash drive or a USB CD/DVD ROM drive may be used for this purpose. Please note that the USB hard disk drive is NOT supported at this moment. Follow the procedure below to recover the BIOS.
1. Use a different system, copy the standard BIOS binary image file into a USB flash drive or a writable CD/DVD disc's Root Directory, and rename the file to 밪UPER.ROM?
2. While the system is turned off, insert the USB device that contains the new BIOS binary image (밪UPER.ROM?.
3. Right after powering on the system, press and hold <Ctrl> and <Home> keys together until the USB device's LED indicator comes on. This may take a few seconds or up to one minute to start the process.
4. Once the USB device's LED is on, release the <Ctrl> and <Home> keys. The system may generate beep codes to indicate that the BIOS ROM firmware is being reprogrammed, and a message may also be displayed on the screen. DO NOT INTERRUPT THIS PROCESS UNTIL IT뭆 FINISHED!
5. After the Boot Sector Recovery Process is complete, the system will reboot automatically.
6. Boot into USB drive again. When DOS prompt appear, please type AMI.BAT BIOSname.### to start BIOS update, just like in standard procedure.
7. Do not interrupt the process until the BIOS update is complete.
8. After you see the message of BIOS has completed the update, unplug the AC, clear the CMOS, and then plug in the AC, power on the system. Go to the BIOS configuration, load the default setting, save and exit the BIOS.
Notes:
** There will be additional beeping after flashing the BIOS, due to the JPME1 and JPME2 jumper location changes.
혹시 빽업하는 방법이 없을가요 ?