안녕하세요?
요즘 시스코 AP설정관련 삽질을 하다가
방법이 떠오르지 않아 문의 드리려 합니다.

먼저 AP상태를 설명 드리겠습니다.

AP 버젼정보 

Processor board ID KWC233704DM
AP Running Image     : 8.5.151.0
Primary Boot Image   : 8.5.151.0
Backup Boot Image    : 8.5.151.0
AP Image type    : MOBILITY EXPRESS IMAGE
AP Configuration : MOBILITY EXPRESS CAPABLE
1 Gigabit Ethernet interfaces

보내주신 단독 ME펌웨어를 TFTP를 통해 업로드 후 업데이트 되었습니다.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-3/b_Cisco_Mobility_Express_Deployment_Guide/b_Cisco_Mobility_Express_Deployment_Guide_chapter_011.html 

위 링크에 나오는 관리자 페이지에서
DHCP SERVER POOL을 아래와 같이 생성하였습니다.

vlan id : 100
Lease time: 86400
Network/Mask : 10.0.0.0 / 255.255.255.0
StartIP : 10.0.0.1
EndIP : 10.0.0.250
Default GateWay : 10.0.0.1
Domanin Name :
NameServer : OpenDNS

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-3/b_Cisco_Mobility_Express_Deployment_Guide/b_Cisco_Mobility_Express_Deployment_Guide_chapter_0100.html 

위 링크에 나오는 관리자 페이지에서
WLANs를 아래와 같이 생성하였습니다.

WLAN id : 2
Profile Name : testname
SSID : testname
AdminState : Enable
Radio Policy : All

LAN Security

Security : WPA2 Personal
PassPhrase : ********

VLAN & Firewall

Use VLAN Tagging : Yes
Native VLAN ID : 2
DHCP Scope : DHCPNAME
VLAN ID : 100
Enable Firewall : No

여기까지 모두 적용하고 나면
정상적으로 와이파이가 활성화 되고 접속도 잘 됩니다.

DHCP를 통해 아이피도 부여 받습니다.

문제는 인터넷이 안됩니다.

인터넷이 없는 상태로 인식하고
내부아이피만 부여된 상태로 되어 있습니다.

웹 UI에서 추가로 수정해야 하는 부분이 있는지
또는 콘솔 Cisco Controller> 에서 따로 연결 작업을 해야 하는지 모르겠네요

제 목표는 내부아이피를 부여받았으니
인터넷 사용만 가능하면 됩니다.

다음은 콘솔에서 찍은 ap summary입니다.

(Cisco Controller) >show ap summary

Number of APs.................................... 1

Global AP User Name.............................. 유저아이디
Global AP Dot1x User Name........................ Not Configured

* prefix indicates Cisco Internal AP

AP Name                         Slots  AP Model              Ethernet MAC       Location              Country     IP Address       Clients  DSE Location
------------------------------  -----  --------------------  -----------------  --------------------  ----------  --------

*testest                         2      AIR-AP1832I-K-K9      맥정보  default location      KE          고정아이피  0        [0 ,0 ,0 ]

(Cisco Controller) >show network summary

RF-Network Name............................. 공유기아이디

DNS Server IP1.............................. 208.67.222.222

DNS Server IP2.............................. 208.67.220.220

Web Mode.................................... Enable

Secure Web Mode............................. Enable

Secure Web Mode Cipher-Option High.......... Disable

Secure Web Mode SSL Protocol................ Disable

OCSP........................................ Disabled

OCSP responder URL..........................

Secure Shell (ssh).......................... Enable

Secure Shell (ssh) Cipher-Option High....... Disable

Telnet...................................... Disable

Ethernet Multicast Forwarding............... Disable

Ethernet Broadcast Forwarding............... Disable

IPv4 AP Multicast/Broadcast Mode............ Multicast   Address : 0.0.0.0

IPv6 AP Multicast/Broadcast Mode............ Multicast   Address : ::

IGMP snooping............................... Disabled

IGMP timeout................................ 60 seconds

IGMP Query Interval......................... 20 seconds

MLD snooping................................ Disabled

MLD timeout................................. 60 seconds

--More-- or (q)uit

MLD query interval.......................... 20 seconds

User Idle Timeout........................... 300 seconds

ARP Idle Timeout............................ 300 seconds

Cisco AP Default Master..................... Disable

AP Join Priority............................ Disable

Mgmt Via Wireless Interface................. Enable

Mgmt Via Dynamic Interface.................. Disable

Bridge MAC filter Config.................... Enable

Bridge Security Mode........................ EAP

Mesh Full Sector DFS........................ Enable

Mesh Backhaul RRM........................... Disable

AP Fallback ................................ Enable

AP EasyAdmin ............................... Disable

AP Virtual IP .............................. 0.0.0.0

Web Auth CMCC Support ...................... Disabled

Web Auth Redirect Ports .................... 80

Web Auth Proxy Redirect  ................... Disable

Web Auth Captive-Bypass   .................. Disable

Web Auth Secure Web  ....................... Enable

Web Auth Secure Web Cipher Option  ......... Disable

Web Auth Secure Web Sslv3  ................. Disable

Web Auth Secure Redirection  ............... Disable

Fast SSID Change ........................... Enabled

--More-- or (q)uit

IP/MAC Addr Binding Check .................. Enabled

Link Local Bridging Status ................. Disabled

CCX-lite status ............................ Disable

oeap-600 dual-rlan-ports ................... Disable

oeap local-network ......................... Enable

oeap-600 Split Tunneling (Printers)......... Disable

WebPortal Online Client .................... 0

WebPortal NTF_LOGOUT Client ................ 0

mDNS snooping............................... Disabled

mDNS Query Interval......................... 0 minutes

Web Color Theme............................. Default

Capwap Prefer Mode.......................... IPv4

Network Profile............................. Typical Deployment with Data traffic

Client ip conflict detection (DHCP) ........ Disabled

Mesh BH RRM ................................ Disable

Mesh Aggressive DCA......................... Disable

Mesh Auto RF................................ Disable

HTTP Profiling Port......................... 80

HTTP-Proxy Ip Address....................... 0.0.0.0

HTTP-Proxy Port............................. 80

WGB Client Forced L2 Roam................... Disabled