HTML 2020-09

Introduction
There are four options for USB connection:
1618; USB HID Keyboard: The scanner’s transmission is simulated as USB keyboard input with no need for command
configuration or a driver. Barcode data could be entered by the virtual keyboard directly and it is also convenient for
the host device to receive data.
1618; USB CDC: It is compliant with the standard USB CDC class specifications defined by the USB-IF and allows the host
device to receive data in the way as a serial port does. A driver is needed when using this feature.
1618; HID POS (POS HID Barcode Scanner): It is based on the HID interface, with no need for a custom driver. It excels
virtual keyboard and traditional RS-232 interface in transmission speed.
1618; IBM SurePOS: It conforms to IBM (now Toshiba Global Commerce Solutions) 4698 USB scanner interface
specifications.
When the scanner is connected to both USB and RS-232 ports on a host device, it will select the USB connection by default.

설명서에 친절히 나와있는듯 usb 연결로 하시면 될거같네요

Doker 2020-09

현재 CDC 타입으로 연결 되어 있습니다.
인터페이스를 변경을 진행 하여도 제공프로그램에서는 데이터가 읽히는데.... 다른 프로그램에서는 입력이 되질 않습니다.

HTML 2020-09

USB HID Keyboard: The scanner’s transmission is simulated as USB keyboard input with no need for command
configuration or a driver. Barcode data could be entered by the virtual keyboard directly and it is also convenient for
the host device to receive data.
아무런 설정이 필요없다고 합니다.
 
반면 cdc 에서는 드라이버 필요

1618; HID POS (POS HID Barcode Scanner): It is based on the HID interface, with no need for a custom driver. It excels
virtual keyboard and traditional RS-232 interface in transmission speed.
hid pos 에서도 역시 드라이버 없어도 되고 가상키보드로 잘 작동.

Doker 2020-09

하기 방법으로 제 PC가 이상한거 같아 신규 시스템 셋팅후 진행 하였는데도 제공 프로그램인 EasySet 에서만 데이터가 읽히네요... ㅜㅜ
삽질이 필요한거 같습니다...

HTML 2020-09

Scan Mode
1618; Level Mode: A trigger pull activates a decode session. The decode session continues until a barcode is decoded or
you release the trigger.
1618; Sense Mode: The scanner activates a decode session every time it detects a barcode presented to it. The decode
session continues until a barcode is decoded or the decode session timeout expires. Reread Timeout can avoid
undesired rereading of same barcode in a given period of time. Image Stabilization Timeout gives the scanner time
to adapt to ambient environment after it decodes a barcode and “looks” for another. Image Change Trigger
Sensitivity can change the Sense Mode’s sensibility to changes in images captured, while IR Proximity Trigger
Sensitivity can adjust the Sense Mode’s sensibility in detecting barcodes presented to the scanner.
1618; Continuous Mode: The scanner automatically starts one decode session after another. To suspend/resume barcode
reading, simply press the trigger. Timeout between Decodes (Same Barcode) can avoid undesired rereading of
same barcode in a given period of time. Note that when switching to this mode by scanning the Continuous Mode
barcode, the scanner will stop barcode reading for 3 seconds before starting scanning continuously.
1618; Pulse Mode: When the trigger is pulled and released, scanning is activated until a barcode is decoded or the decode
session timeout expires (The decode session timeout begins when the trigger is released).

HTML 2020-09

hid 키보드면 메모장에도 입력되고 그렇습니다.

일단 메모장에서 테스트 해보세요

메모장 열고 삑 찍으면 타이핑 입력