안녕하세요.

이번에 iodrive 2 785gb를 사용하다가 Fusion-io ioDrive2 Duo 2.41TB로 변경하였습니다.

785gb와 다르게 fct가 두개가 나와서 Attached 하였지만 fct1이 MINIMAL MODE가 되어서 변경이 되지 않습니다.

fct1 을 Attached 하려면 어떻게 해야 하나요?

fio-status.exe -a 내용입니다.

Found 2 ioMemory devices in this system with 1 ioDrive Duo
Driver version: 3.2.15 build 1699

Adapter: Dual Controller Adapter
        Fusion-io ioDrive2 Duo 2.41TB, Product Number:F01-001-2T41-CS-0001, SN:1345D11B8, FIO SN:1345D11B8
        ioDrive2 Adapter Controller, PN:PA004134010
        SMP(AVR) Versions: App Version: 1.0.35.0, Boot Version: 0.0.8.1
        External Power Override: ON
        External Power: NOT connected
        PCIe Power limit threshold: 74.75W
        PCIe slot available power: unavailable
        Connected ioMemory modules:
          fct1: SN:1345D11B8-1121
          fct2: SN:1345D11B8-1111

fct1    Status unknown: Driver is in MINIMAL MODE:
                General channel initialization failure
        SN:1345D11B8-1121
!! ---> There are active errors or warnings on this device!  Read below for details.
        SMP(AVR) Versions: App Version: 1.0.29.0, Boot Version: 0.0.9.1
        Located in slot 1 Lower of ioDrive2 Adapter Controller SN:1345D11B8
        Powerloss protection: not available
        PCI:05:00.0
        Vendor:1aed, Device:2001, Sub vendor:1aed, Sub device:2001
        Firmware v7.1.17, rev 116786 Public
        Geometry and capacity information not available.
        Format: not low-level formatted
        PCIe slot available power: 25.00W
        PCIe negotiated link: 4 lanes at 5.0 Gt/sec each, 2000.00 MBytes/sec total
        Internal temperature: 44.30 degC, max 44.79 degC
        Internal voltage: avg 1.02V, max 1.02V
        Aux voltage: avg 2.51V, max 2.51V
        Rated PBW: 17.00 PB
        Lifetime data volumes:
           Physical bytes written: 0
           Physical bytes read   : 0
        RAM usage:
           Current: 0 bytes
           Peak   : 0 bytes

        ACTIVE WARNINGS:
            The ioMemory is currently running in a minimal state.

fct2    Attached
        SN:1345D11B8-1111
        SMP(AVR) Versions: App Version: 1.0.29.0, Boot Version: 0.0.9.1
        Located in slot 0 Upper of ioDrive2 Adapter Controller SN:1345D11B8
        Powerloss protection: protected
        PCI:06:00.0
        Vendor:1aed, Device:2001, Sub vendor:1aed, Sub device:2001
        Firmware v7.1.17, rev 116786 Public
        1205.00 GBytes device size
        Format: v500, 294189453 sectors of 4096 bytes
        PCIe slot available power: 25.00W
        PCIe negotiated link: 4 lanes at 5.0 Gt/sec each, 2000.00 MBytes/sec total
        Internal temperature: 46.26 degC, max 47.25 degC
        Internal voltage: avg 1.02V, max 1.02V
        Aux voltage: avg 2.51V, max 2.51V
        Reserve space status: Healthy; Reserves: 100.00%, warn at 10.00%
        Active media: 100.00%
        Rated PBW: 17.00 PB, 100.00% remaining
        Lifetime data volumes:
           Physical bytes written: 143,264,318,672
           Physical bytes read   : 27,379,893,528
        RAM usage:
           Current: 70,058,688 bytes
           Peak   : 70,062,848 bytes
        Contained VSUs:
          fct2: ID:0, UUID:6f236610-6357-c74e-92b2-d5efd510bb43

fct2    State: Online, Type: block device
        ID:0, UUID:6f236610-6357-c74e-92b2-d5efd510bb43
        1205.00 GBytes device size
        Format: 294189453 sectors of 4096 bytes

아래와 같이 포멧도 진행하였으나 에러로 불가 하였습니다.

fio-format.exe /dev/fct1

/dev/fct1: Error detected. Device is not in a valid state to handle request.

WARNING: Formatting will destroy any existing data on the device!
Do you wish to continue [y/n]? y

WARNING: Do not interrupt the formatting! If interrupted, the fio-sure-erase utility may help recover from format errors. Please see documentation or contact support.

Formatting: [                    ] (  0%) /

Error: Device '/dev/fct1' had an error while formatting: Device is not in a valid state to handle request.
The fio-sure-erase utility may help recover from some format errors.

Additional details about the error may be found in system logs. Please see documentation or contact support for further assistance.

아래와 같이 진행하였습니다.

fio-sure-erase /dev/fct1

WARNING: sanitizing will destroy any existing data on the device!
Do you wish to continue [y/n]? y
Erasing blocks: [====================] (100%)
Error: Device '/dev/fct1' is not in a valid state.
   Sure erase requires the device to be detached.
Failure: SN:1345D11B8-1121 Device:/dev/fct1