tftp64 를 이용해서 srx300 운영체재 파일을 다운로드 시도중인대 파일을 다운 받는대 자꾸 중간에 멈추면서 다운이 재대로 안됩니다...월래부터 연결이 안되면 모르겠는대 중간 이후부터 저렇게 오류가 나니 이유를 모르겠습니다..고수분들 의 도움이 필요합니다.
srx300 설정 과 상태는

SPI stage 1 bootloader (Build time: Apr 26 2020 - 21:42:44)

U-Boot 2013.07-JNPR-3.9 (Build time: Apr 26 2020 - 21:42:45)

Octeon unique ID: 088000314115f31e0150

N0.LMC0 Configuration Completed: 4096 MB

SRX_300 board revision major:1, minor:7, serial #: CV2816AF0120

OCTEON CN7020-AAP pass 1.2, Core clock: 1200 MHz, IO clock: 600 MHz, DDR clock: 667 MHz (1334 Mhz DDR)

DRAM: 4 GiB

Clearing DRAM...... done

SF: Detected SF with page size 256 Bytes, erase size 64 KiB, total 8 MiB

U-Boot 2013.07-JNPR-3.9 (Build time: Apr 26 2020 - 21:44:35)

Octeon unique ID: 088000314115f31e0150

Using DRAM size from environment: 4096 MBytes

SRX_300 board revision major:1, minor:7, serial #: CV2816AF0120

OCTEON CN7020-AAP pass 1.2, Core clock: 1200 MHz, IO clock: 600 MHz, DDR clock: 667 MHz (1334 Mhz DDR)

DRAM: 4 GiB

Clearing DRAM...... done

SF: Detected SF with page size 256 Bytes, erase size 64 KiB, total 8 MiB

SATA0: not available

SATA1: not available

PCIe: Port 0 link active, 1 lanes, speed gen2

PCIe: Link timeout on port 1, probably the slot is empty

PCIe: Port 2 not in PCIe mode, skipping

Net:   octeth0

Node 0 Interface 0 has 1 ports (SGMII)

Boot Media: eUSB usb

Found TPM SLB9660 TT 1.2 by Infineon

TPM initialized

USB1:   Starting the controller

USB XHCI 1.00

scanning bus 1 for devices... 2 USB Device(s) found

USB0:   Starting the controller

USB XHCI 1.00

scanning bus 0 for devices... 2 USB Device(s) found

       scanning usb for storage devices... 2 Storage Device(s) found

Type the command 'usb start' to scan for USB storage devices.

Press SPACE to stop autoboot:  0

SF: Detected SF with page size 256 Bytes, erase size 64 KiB, total 8 MiB

SF: 1048512 bytes Read: OK

SF: 1048576 bytes Read: OK

## No elf image at address 0x00100000

Octeon srx_300(ram)# setenv ipaddr 192.168.1.5

Octeon srx_300(ram)# setenv ipaddr 192.168.1.20

Octeon srx_300(ram)# setenv netmask 255.255.255.0

Octeon srx_300(ram)# setenv gateway 192.168.1.1

Octeon srx_300(ram)# setenv serverip 192.168.1.10

Octeon srx_300(ram)# saveenv

현재 이 상태 입니다
tftp64 설정은 이런 상태입니다.

도움 주실분들에게 미리 감사의 말씀 전합니다.