M-Shell 을 사용한 TCRP  DS3622xs+의 DSM 7.2-64570  한번에  설치가 정상적으로 진행 되나요?

57% 진행 이후에 DSM 설치 오류가 발생됩니다.

부팅 메시지에서는 아래처럼 7.2.0-6450 update 0 으로 나오지만

Synology Assistant 에서는  7.2.0-6450 update 1 으로 표시됩니다.

M-shell 메뉴에서의 옵션 선택을  DDSML , DS3622xs , Friend 으로  하고  Serial과 LAN MAC은 랜덤으로 선택 하였고

DSM  3가지 버전 선택중  7.2.0-6450 을 선택하였는데

DSM은 아래 화살표 표시된 시놀로지사 에서 "DSM_DS3622xs+_64570.pat" 파일을 다운로드 했습니다.

메시에서 나오는 설명을 따라서 http://192.168.0.190:7681/ 를 하면 로그인 화면으로 접속되는데요.

/var/log/linuxrc.syno.log 파일에서 의심되는 에러 부분은 아래와 같습니다.

파일 첨부 : "linuxrc.syno.log"

..........................................

Ran "install-nvme-cache.sh" for nvme-cache->on_boot - exit=0

Running "install.sh" for reboottotcrp->on_boot

System is booting

reboottotcrp - early

Ran "install.sh" for reboottotcrp->on_boot - exit=0

Running "boot-wait.sh" for thethorgroup.boot-wait->on_boot

Still waiting for boot device (waited 1 of 10 seconds)

Still waiting for boot device (waited 2 of 10 seconds)

Still waiting for boot device (waited 3 of 10 seconds)

Still waiting for boot device (waited 4 of 10 seconds)

Still waiting for boot device (waited 5 of 10 seconds)

Still waiting for boot device (waited 6 of 10 seconds)

Still waiting for boot device (waited 7 of 10 seconds)

Still waiting for boot device (waited 8 of 10 seconds)

Still waiting for boot device (waited 9 of 10 seconds)

Still waiting for boot device (waited 10 of 10 seconds)

ERROR: Timeout waiting for /dev/synoboot device to appear.

Most likely your vid/pid configuration is not correct, or you don't have drivers needed for your USB/SATA controller

========== BEGIN DUMP OF ALL PARTITIONS DETECTED ===========

Error: /dev/sdg: unrecognised disk label

Error: /dev/sdh: unrecognised disk label

Error: /dev/sdi: unrecognised disk label

Error: /dev/sdj: unrecognised disk label

Error: /dev/sdk: unrecognised disk label

Error: /dev/sdl: unrecognised disk label

Error: /dev/sdm: unrecognised disk label

Error: /dev/sdn: unrecognised disk label

get disk fail

get disk fail

get disk fail

get disk fail

get disk fail

get disk fail

get disk fail

get disk fail

========== END OF DUMP OF ALL PARTITIONS DETECTED ==========

Force the creation of synoboot , synoboot1 , synoboot2 and synoboot3 nodes...

Confirmed a valid-looking /dev/synoboot device

Ran "boot-wait.sh" for thethorgroup.boot-wait->on_boot - exit=0

:: Executing "on_boot" custom scripts ... [  OK  ]

Extensions processed

insmod: can't insert '/lib/modules/etxhci-hcd.ko': No such file or directory

Starting /usr/syno/bin/synocfgen...

/usr/syno/bin/synocfgen returns 0

Insert synorbd kernel module

Insert synofsbd kernel module

Insert sha256 kernel module

All disk ready or timeout execeed

Assemble args:

Exit on error [12] No raid status in path /sys/block/md0/md/array_state, go to junior mode...

Sat Jul  8 10:15:36 UTC 2023

none /sys/kernel/debug debugfs rw,relatime 0 0

SynologyNAS> 

ERROR: Timeout waiting for /dev/synoboot device to appear.  

Most likely your vid/pid configuration is not correct, or you don't have drivers needed for your USB/SATA controller

Error: /dev/sdg: unrecognised disk label

이들 에러 중에 DSM 설치 원인이 있을까요?

/mnt/tcrp/user_config.json 파일은 엑세스 할 수 없습니다.

SynologyNAS> dmesg

[   35.575384] igb 0000:03:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX

[   36.006303] igb 0000:04:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX

[   42.489299] usbcore: registered new interface driver usbhid

[   42.489620] usbhid: USB HID core driver

[  922.790785] findhostd uses obsolete (PF_INET,SOCK_PACKET)

[ 1018.002911] md: bind<sdg1>

[ 1018.003322] md: bind<sdh1>

[ 1018.003654] md: bind<sdi1>

[ 1018.003954] md: bind<sdj1>

[ 1018.004329] md: bind<sdk1>

[ 1018.004664] md: bind<sdl1>

[ 1018.004966] md: bind<sdm1>

[ 1018.005281] md: bind<sdn1>

[ 1018.007357] md/raid1:md0: active with 8 out of 16 mirrors

[ 1018.017059] md0: detected capacity change from 0 to 8589869056

[ 1021.390459] md: bind<sdg2>

[ 1021.390847] md: bind<sdh2>

[ 1021.391202] md: bind<sdi2>

[ 1021.391536] md: bind<sdj2>

[ 1021.391871] md: bind<sdk2>

[ 1021.392255] md: bind<sdl2>

[ 1021.392587] md: bind<sdm2>

[ 1021.392904] md: bind<sdn2>

[ 1021.395026] md/raid1:md1: active with 8 out of 16 mirrors

[ 1021.406441] md1: detected capacity change from 0 to 2147418112

[ 1022.899967] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities

[ 1022.940320] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)

[ 1023.354761] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities

[ 1023.437581] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)

[ 1023.469164] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities

[ 1023.480737] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)

dmesg 에서 USB 일부 파티션이 마운트 하지 못하는 것이 원인 일까요?

설치에 사용한 보드는 Asrock E3C224D2I , Intel Core i7-4790K , 16GB RAM  이고 HBA는 LSI9207 에 SATA HDD 8개가 장착 되어 있습니다.

온보드 SATA 포트에는 HDD가 장착되지 않았습니다.

USB 메모리에 TCRP v0.9.4.3-2 tinycore-redpill-uefi.v0.9.4.3-2.m-shell.img 를  사용 합니다.

어떻게 해야 설치가 되는 것인가요?

감사 합니다.