Processor
Dual PGA370 ZIF sockets
Supports up to two Intel Pentium III Processors or Pentium III Processors with 512kB Cache
Single onboard VRMs supports both processors
FSB support for 100MHz and 133MHz
Processor speeds: CPU chart
Chipset
ServerWorks ServerSet III HE-SL chipset
Integrated I/O APIC
CIOB20 I/O bridge and CSB5 south bridge
National NS87417 Super I/O ASIC
System Memory
Six 3.3v 168-pin DIMM sockets
Up to 6GB PC133 Registered SDRAM
Support ECC (72-bit) memory modules
Hardware Monitoring
Winbond W83782D hardware monitoring ASIC
CPU temperature, voltage, and fan speed monitoring
Expansion Slots
Three 64-bit 66MHz (5-volt) PCI slots. *
One 64-bit 66MHz (3.3-volt) PCI slot. *
3.3-volt slot supports Adaptec 2000S zero-channel RAID controller.
Two 32-bit 33MHz (5-volt) PCI slots.
Total of six usable slots
Note: Click the PCI slot on image above.
Integrated I/O
One floppy connector supports up to two drives
Two 9-pin 16550-based serial ports
One 25-pin SPP/ECP/EPP parallel port
Four USB ports (two via optional cable)
PS/2 keyboard and mouse ports
Integrated PCI IDE
Dual-channel master mode
Up to four Enhanced IDE devices
Support for ATA-66/33 compliant IDE and ATAPI compliant devices **
Integrated Graphics
ATI RAGE XL graphics accelerator
4MB frame buffer (SDRAM)
Standard 15-pin analog VGA ports
Integrated LAN Controllers
Dual LAN controllers (Intel 82559)
10/100Mbps data transfer rate per controller
Integrated SCSI Controller
Adaptec AIC-7899W controller
Dual-channel Ultra160 SCSI support
160MBps maximum data throughput per channel
Up to 15 LVD SCSI devices per channel
Integrated Server Management (optional)
Tyan Server Management Connector
Supports the Intelligent Platform Management Interfaces (IPMI)
Support for IPMI, SDR, SEC, FRU
One IPMB and two I2C serial interfaces
BIOS
AMI BIOS on 4Mb Flash ROM
Supports APM v1.2 and ACPI v1.0
User settings for hardware monitoring
Auto-configuration of IDE hard drive types
Multiple boot options
DMI 2.0 compliant
Form Factor
Extended ATX footprint
(13\" x 12\", 330.2mm x 304.8mm)
One 20-pin ATX power connector
Stacked parallel (one), serial (one) and VGA (one) ports
Stacked USB (two) ports
Side-by-side LAN (two with LED) ports
Stacked keyboard and mouse ports
Regulatory
FCC DoC (Declaration of Conformity)
European CE (Declaration of Conformity)
Dual PGA370 ZIF sockets
Supports up to two Intel Pentium III Processors or Pentium III Processors with 512kB Cache
Single onboard VRMs supports both processors
FSB support for 100MHz and 133MHz
Processor speeds: CPU chart
Chipset
ServerWorks ServerSet III HE-SL chipset
Integrated I/O APIC
CIOB20 I/O bridge and CSB5 south bridge
National NS87417 Super I/O ASIC
System Memory
Six 3.3v 168-pin DIMM sockets
Up to 6GB PC133 Registered SDRAM
Support ECC (72-bit) memory modules
Hardware Monitoring
Winbond W83782D hardware monitoring ASIC
CPU temperature, voltage, and fan speed monitoring
Expansion Slots
Three 64-bit 66MHz (5-volt) PCI slots. *
One 64-bit 66MHz (3.3-volt) PCI slot. *
3.3-volt slot supports Adaptec 2000S zero-channel RAID controller.
Two 32-bit 33MHz (5-volt) PCI slots.
Total of six usable slots
Note: Click the PCI slot on image above.
Integrated I/O
One floppy connector supports up to two drives
Two 9-pin 16550-based serial ports
One 25-pin SPP/ECP/EPP parallel port
Four USB ports (two via optional cable)
PS/2 keyboard and mouse ports
Integrated PCI IDE
Dual-channel master mode
Up to four Enhanced IDE devices
Support for ATA-66/33 compliant IDE and ATAPI compliant devices **
Integrated Graphics
ATI RAGE XL graphics accelerator
4MB frame buffer (SDRAM)
Standard 15-pin analog VGA ports
Integrated LAN Controllers
Dual LAN controllers (Intel 82559)
10/100Mbps data transfer rate per controller
Integrated SCSI Controller
Adaptec AIC-7899W controller
Dual-channel Ultra160 SCSI support
160MBps maximum data throughput per channel
Up to 15 LVD SCSI devices per channel
Integrated Server Management (optional)
Tyan Server Management Connector
Supports the Intelligent Platform Management Interfaces (IPMI)
Support for IPMI, SDR, SEC, FRU
One IPMB and two I2C serial interfaces
BIOS
AMI BIOS on 4Mb Flash ROM
Supports APM v1.2 and ACPI v1.0
User settings for hardware monitoring
Auto-configuration of IDE hard drive types
Multiple boot options
DMI 2.0 compliant
Form Factor
Extended ATX footprint
(13\" x 12\", 330.2mm x 304.8mm)
One 20-pin ATX power connector
Stacked parallel (one), serial (one) and VGA (one) ports
Stacked USB (two) ports
Side-by-side LAN (two with LED) ports
Stacked keyboard and mouse ports
Regulatory
FCC DoC (Declaration of Conformity)
European CE (Declaration of Conformity)
ªÀº±Û Àϼö·Ï ½ÅÁßÇÏ°Ô.